BOQ OF PH WORKS FOR CONSTRUCTION OF 350 SEATERS BOYS HOSTEL FOR UNDER GRADUATE STUDENTS AT NATIONAL INSTITUTE OF TECHNOLOGY, KURUKSHETRA
(BASED ON HSR-1988 & LATEST SANCTIONED PREMIUM W.E.F. 01-01-2008)
Sr. No.	HSR No.	Description	Qty.	Unit
		SUB PART-III: INTERNAL PH SERVICES (SCHEDULE ITEMS)
1	30.40	Providing & fixing 25mm thick, marble partitions for different type of urinals.
	(a)	Size 375mmx750mm	24	Each
2	30.41	P/F in position best Indian make lavatory Suites
		White
		(iv) Size 550mmx400mm with one no. tap	56	Each
3	30.45	Providing and fixing in position best Indian make chromium plated brass 2nd tap for lavatory suite.	56	Each
4	30.48	P/F in position 32mm diameter G.I.waste pipe embedded in wall	56	Each
5	30.50	P/F in position best Indian make C.P. brass bottle traps 32mm diameter	56	Each
6	30.58	Providing and fixing in position best quality stainless steel draining board with iron brackets for building into wall including painting, cutting and making good the walls etc.
		Size 600 mm x 450 mm	1	Each
7	30.62	P/F 40mm diameter G.I.waste pipe embedded in wall or upto floor level including cost of union and plumbing joints	18	Each
8	30.66	P/F in position best Indian make showers with 15mm diameter inlet.
	(c)	C.P. brass with revolving shower	51	Each
9	30.67	P/F in position best Indian make paper holder fixed into C.P. including cutting & making good the walls etc.
	(a)	C.P. brass	38	Each
10	30.68	Providing and fixing in position best Indian make towel rails fixed including cutting and making good the wall etc.
	(b)	20 mm diameter C.P. brass adjustable
		(i) 750 mm long	64	Each
		(ii) 600 mm long	64	Each
11	30.69	P/F in position glass shelf fixed in with rawl plugs with C.P. brass screws complete including cutting & making good the walls etc.
	(a)	With C.P. brass bracket and guard rail
		(i) 600mm x 125m	58	Each
12	30.70	P/F in position best Indian make soap dish fixed into wall with C.P. brass screws complete in all respects including cutting & making good the walls etc.
	(a)	C.P. brass
	(i)	Soap dish large	110	Each
13	30.71	P/F in position best Indian make bevelled edge 5.5mm thick mirror fixed in position by means of 4 nos. C.P. brass screws and washers complete including cutting and making good the walls etc.
	(a)	Indian make
		(ii) 600 mm x 450mm	56	Each
14	30.73	P/F in position best Indian make coat & hat hooks fixed with C.P. brass screws complete including cutting and making good the walls etc.
	(a)	C.P. brass
		(ii) Two way	520	Each
15	30.74	Providing and fixing in position super quality 65 mm i/d opening CP brass dome type hinged grating weighting about 750 gms. Fixed in cement mortar 1:2 complete in all respects (as required by the Engineer-in-charge).	50	Each
16	30.75	Providing & fixing in position 15mm i/d C.P. brass bib cocks of best quality (as required by the Engineer-in-charge)
	(a)	Bib cock long body	150	Each
	(c )	Bib cocks	68	Each
17	30.76	P/F in position C.P. brass stop cocks (as approved by Engineer-in-charge)
	(a)	15mm stop cocks
		(ii) Concealed stop cocks with flange	162	Each
18	30.83	P/F in position best Indian make C.P. brass inlet connection 15mm with 375mm pipe & CP brass nuts.	390	Each
19	30.84	P/F in position HCI soil, waste, vent pipes to ISI specification or any other reputed firm including cutting & wastage etc. & cutting holes in walls, roofs or floor etc. and making good the floor & wall but excluding cost of lead jointing.
	(a)	100mm internal diameter	690	Mtr.
	(b)	75mm internal diameter	804	Mtr.
20	30.87	Providing lead caulked joints to HCI pipes & specials conforming to ISI specification of ELC or any other reputed firm including cost of lead yarn, fuel & tools etc.
	(a)	100mm internal diameter (1.13 kg)	800	Each
	(b)	75 mm internal diameter (0.91 kg)	900	Each
21	30.88	Providing and fixing in position MS or Heavy flat iron clamps made out of MS flat not less than 5 mm of the approved design for fixing CI Soil waste vent or anti pipes to walls complete in all respects including cutting and making good the walls and floors etc. and painting
	(a)	For 100 mm internal diameter pipes	160	Each
	(b)	For 75  mm internal diameter pipes	160	Each
22	30.89	P/F HCI floor trap ISI marked of the self-cleaning design with C.P. brass hinged grating with or without vent arm & including cement concrete 1:2:4 complete in all respects
	(b)	With 75mm internal diameter outlet	47	Each
23	30.90	PROVIDING AND  FIXING IN POSITION HCI 50mm INTERNAL DIAMETER OUTLET PLAIN NAHAN TRAP ISI Marked of the self cleaning design with CP BRASS HINGED GRATING WITH FRAME WEIGHING 6.80 KG EACH FIXED complete as fully described in item no. 30.89 above.
	(b)	75 mm i/d outlet plain Nahani Trap.	140	Each
24	30.91	P/F in position HCI specials for soil waste vent pipes to ISI specification including cutting holes in walls & making good but excluding cost of lead joints
	(a)	For 100mm internal diameter pipes
		(i) heal rest bend	22	Each
		(iv) single junction with door 100mm x100mm x100mm	66	Each
		(vi) Single junction plain 100mmx100mmx100mm	50	Each
		(xiii) Bend with door	25	Each
		(xiv) Bend plain	25	Each
		(xvii) door piece	25	Each
		(xvi) Cowls	22	Each
		(xxii) Collars	90	Each
	(b)	For 75mm internal diameter pipes
		(i) Heal rest bend	22	Each
		(iv) Single junction with door 75mmx75mmx75mm	66	Each
		(xiii) Bend with door	25	Each
		(xiv) Bend plain	25	Each
		(xvi) door piece	25	Each
		(xvii) Cowls	22	Each
		(xviii) Collars	160	Each
25	30.95	Cutting chase in brick wall in cement for embedding G.I. or HCI pipe lines & making good the same
	(a)	Size 75x75mm	240	Mtr.
26	30.101	Painting HCI soil waste and vent pipes and fittings with black bitumastic ordinary paint of approved manufacture two coats on new work.
		(a) 100 mm internal diameter	288	MTR
		(b) 75 mm internal diameter	288	MTR
27	30.110	P/F in position automatic brass ball valves in tanks
	(b)	With plastic ball
		(iii) 25mm diameter	24	Each
28	30.114	P/F in position Gully traps fixed in cement concrete 1:4:8 with HCI grating 150x150mm CI cover weighing approximately 7.26 kg & frame clear opening 300 x 300mm and chamber including cost of brick work 1:5 cement concrete 1:8:16 and C.C. 1:2:4 in coping
	(b)	100mm internal diameter HCI gully traps	30	Each
29	30.115	Providing and fixing in position best Indian make vitreous china ware channel of size 600 mm x 150 including laying and fixing in cement concrete 1:2:4 complete as required by the Engineer-in-charge.
	(i)	White	56	Each
30	28.24	Cutting holes upto 23cm through brick work in cement wall for pipes and making good
	(a)	11.43cm thickness of walls	250	Each
	(b)	22.86 cm. thickness of walls	350	Each
31	28.47	Bailing out water from the trenches for making new connections in fully charged pipelines
	(a)	Upto 200mm internal diameter	4	Each
32	29.84	Constructing brick masonry inspection chamber upto 60 mtr.depth in cement mortar 1:5 cement concrete 1:2:4 benching, 12mm thick cement plaster, RCC 1:2:4 slab 100mm thick with with 455x455 mmx455x610mm inside light duty GI inspection chamber cover & frame with 3 coats of black bitumastic paint.
	(c)	Size 600x900mm inside	50	Each
33	29.85	Extra for every 0.30 mts. depths of inspection chamber
	(c)	600mmx900mm	50	Per .3 mtr. depth
34	6.8	Excavation for pipelines running under pressure in trenches and pits in open areas where disposal of surplus earth is done alongwith the alignment and restoration of unmetalled surface to the original condition
	(a)	Without timbering and shoring upto 1.5 meters depth	273	100 Cum
35	6.10	Excavation of trenches in street lanes or in open area for storm sewer, sewers running by gravity & man holes to full depth and removal of surplus soil upto to a lead of 1Km in ordinary soil
	(a)	For depth of excavation not exceeding 3 mts. below ground level	795	100 Cum
36	10.39	Cement concrete 1:4:8 with stone aggregate 40mm nominal size in foundation and plinth	70	Cum
37	10.41	Cement concrete 1:2:4 with stone aggregate 20mm nominal size in foundation and plinth	25	Cum
38	10.59	Cement concrete 1:2:4 with stone aggregate 20mm nominal size in in first storey upto 4 metres above plinth level
	10.50+ note (v)(b)	-do- (first storey)	10	Cum
	10.50+ note (v)(b)	-do- (second storey)	10	Cum
	10.50+ note (v)(b)	-do- (third storey)	10	Cum
	10.50+ note (v)(b)	-do- (forth storey)	10	Cum
Sr. No.	HSR No.	Description	Qty.	Unit	Rates to be Quoted by Contractor (In Rs.) In Figure and In Words
		SUB PART-IV: INTERNAL PH SERVICES (NON-SCHEDULE ITEMS)
1	NS	Providing & fixing in position best Indian make (to the approval of Engineer-in-charge) 580mm white Indian make Orissa type water closet suit for sinking into floor with raised foot best treads with 100mm H.C.I.P trap along with:-	38	Each
		1. White PVC 10 ltds. Capacity low level flushing cistern (as approved by Engineer-in-charge) complete with Internal PVC fitting like syption, 15mm i/d ball cock along with R.S. or CI painted bracket and 32mm dia CP/GI outlet pipes. Mosquito proof over flow pipe etc. complete in all respect including cutting and making good the wall and floor and painting fitting. Note: PVC cistern of make Titanic OASIS, Jindal, Parryware, Front Line to be used
2	NS	Providing & fixing in position best Indian make (to the approval of Engineer-in-charge) Single trap symphonic European type white water closet suit consisting of:-	27	Each
		(i)  White PVC 10 Ltr. Capacity low level flushing  like syption, 15mm i/d ball cock along with R.S. or CI  bracket and 32mm dia CP brass bend for out let, Mosquito proof over flow pipe etc.
		(ii) Best laid in make white plastic seat (Solid) and i/d fitting with set & C.P. chromium plated hinges and rubber buffers (to the approval of Engineer-in-charge). Complete in all respect including cutting and making good the wall and floor.
3	N.S	Providing & fixing in position best Indian make flat back single front Urinals 610mm high consisting of:-	42	Each
		1.  Flat back lipped urinal basin of vitreous china ware (to the approval of Engineer-in-charge)
		2.  Pair of C.I. or M.S. special type bracket for urinal.
		3. 32 mm dia waste coupling (Prayag make) with standard size G.I. flush pipe.
		4. 15mm dia Urinal cock and spreader (Prayag Make connected 10 Lt. C.P. brass copper pipe and C.P. brass nuts.
		Complete including cutting and making good the wall and floor (as approved by Engineer-in-charge)
4	N.S	Providing & laying Cement Concrete 1:2:4 75mm in bed and around C.I. Soil waste pipe 100mm and 75mm i/d under floor including centering and shuttering where required.
	(a)	100mm dia	100	Mtr.
	(b)	75 mm dia	100	Mtr.
5	NSR	P/F in position C.P. jet connection of EWC complete including C.P. plate for jet & PVC connection for jet point complete in all respects.	27	Each
6	NSR (based on 30.53)	Providing and fixing in position best quality stainless steel sinks with complete fittings as fully described in item No.30.51 above.
		(a) 600 mm x 450 mm x 200 mm	1	Each
7	NSR (based on 30.59)	Providing and fixing in position best quality stainless steel sink built in draining board of size 600 mm x 450 mm complete as described in item no. 30.53 and 30.58 above
		(a) Sink size 600 x 450 x 200 mm	4	Each
8	NSR	Providing, laying, jointing glazed stoneware pipes grade Á' with stiff mixture of cement mortar in the proportion of 1:1 (1 cement, 1 fine sand) including testing of joints etc. complete.
		150mm i/d	800	Mtr.
	(b)	200mm i/d	300	Mtr.
9	NS	Providing and fixing of G.M. Peat valves heavy patterns with hand wheels ISI marked to GI pipe lines.
	(a)	25mm i/d	60	Each
	(b)	40mmi/d	32	Each
	(c)	80mmi/d	6	Each
10	NSR	Providing, testing and  fixing G.I. pipe 'B' class medium duty including cost of specials such as Tee, elbow, bends etc. and threading inside the building & Groung
		15mm i/d	2000	Mtr.
		20mm i/d	300	Mtr.
		25mm i/d	1200	Mtr.
		40mm i/d	800	Mtr.
		50mm i/d	350	Mtr.
		80mm i/d	500	Mtr.
11	NSR	Extra for providing and fixing union coupling to G.I. pipe lines including cost of union complete
		15mm i/d	20	each
		20mm i/d	10	each
		25mm i/d	25	each
		40mm I/d	10	each
		80mm I/d	20	each
12		Providing and stringing  S & S centrifugally cast (spun) iron pipes (Class LA)  complete in trenches to the approval of Engineer-in-charge.
		80mm i/d	200	Mtr.
13		Supplying and fixing ISI marked sluice valve double flanged with brass spindle complete in all respect to the approval of Engineer-in-charge. 80 mm	5	Each
14		Const. of sluice valve haudi 1m x 1m x 1m with brick work 1:5 cement sand mortar finished with 12.5mm cement plaster 1:4 including RCC 1:2:4 slab with reinforcement, surface box complete in all respect to the approval of Engineer-in-charge.	5	Each
15		Providing and fixing in position H.D.P.E. water tanks complete with inlet, outlet, scour and overflow flanges including masonry based underneath as approved by the Engineer-in-charge of different capacity tanks complete in all respect.
		Capacity upto 2000 litres	44000	Ltrs.
16		Construction brick masonry manhole in cement mortar 1:4 (1cement : 4 coarse sand) R.C.C. top slab with 1:2:4 mix (1cement:2coarse sand: 4 graded stone aggregate 20mm nominal size), foundation concrete 1:4:8mix (1cement:4coarse sand :8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1cement :3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1cement : 2coarse sand :4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design ;
		Inside Size 120x90cm and 90 cm deep including SFRC Cover with frame (Heavy duty) 580mm internal diameter
		With Sewer bricks	15	Each
17	NSR	Extra for depth for manholes
		Size 120x90cm
		With Sewer bricks	9	Mtr.
18	NSR	Making sewer connection with the existing sewer line	2	Each
19	NSR	Providing M.S. foot rests including fixing in manholes with 20x20x10cm cement concrete blocks 1:3:6 (1cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size) as per standard design :
		With 20x20mm square bar	70	Each
	Note (i)	All china ware should be of CERA/HINDWARE/ PERRYWARE Make Ist quality
		All C.P. fittings/fixtures should be of SEIKO/PARKO/ Chilly make.
		All G.I. fittings should be UNIK  & G.I Pipe should be TATA/Jindal Hissar