1.

31.12 (c)

Moulded case circuit breakers
Supply and erection of moulded case circuit breaker on wall or on existing pedestal including bonding to earth and necessary connection:

(i)

15A to 60A 415V 10KA 3 Phase (MCCB 60A)

1

Each

(d)

Sheet Steel Enclosure
Supply and erection of sheet steel enclosures distribution boards suitable for MCBs etc. on wall / existing boards / pedestal with rag bolts including bonding to earth:

(v)

Distribution board 6 way (TPN)

1

Each

2.

31.17

Supply and erection of miniature circuit breaker / isolator 240/415V in the existing distributin board including making necessary connections:

(ii)

6A to 32A SP (Havell's / Standard)

18

Each

3.

31.19 (iii)

Painting of pole with 2 coats of enamelled paint or other approved paint.

(a)

upto the height of 7m

1

Single bracket

81

Each

4.

31.21

Supply and erection of pipe for wiring purposes including bends inspection boxes etc. where masonary and painting as required:

(xxx)

Supply and erection of PVC pipe of 6kg pressure, laid 1m below ground level complete, including digging refilling of the trench with jointinge etc.

(c)

PVC pipe 65mm dia

103

mtrs

5.

31.22

Earthing

(i)

Earthing with GI earth pipe 4.5m long and 40mm dia with masonary enclosures on the top etc. as required.

19

Each

(ii)

Extra for using salt and charcoal / coke for pipe earth electrode as required.

19

Each

(xii)

Providing and laying earth connections from earth electrode with 4mm dia GI wire in 15mm dia GI pipe from earth electrode as required.

38

mtrs

6.

31.25

Supply and erection of underground cable 1m below ground level covered with sand and bricks including necessary connections, digging and refilling of trenches.

(xxvii)

50sqmm 3.5C cable

135

mtrs

(xl)

16sqmm 4C cable

2350

mtrs

7.

31.26

Supply and erection of underground cable loose in existing pipe or trenches complete with necessary connections:

(xxvii)

50sqmm 3.5C cable

30

mtrs

(xl)

16sqmm 4C cable

330

mtrs

8.

31.28

Supply and erection of suitable compression type brass cable glands for underground cable:

(ii)

10sqmm to 16sqmm cable 2C to 4C

162

Each

(iii)

25sqmm to 50sqmm cable 2C to 4C

2

Each

9.

31.30 III.

Supply and erection of stepped steel tubular pole (Swaged type) conforming to IS.S, welded with mild steel base plate of size 30cmx30cmx600mm chick including erection of pole in ground surrounded with 30cm dia of 1:3:6 cement concerete and plateform of 10cm thick to the size of base plate at the bottom.

(i)

7m long single bracket pole duly embedded 1.25m below ground level conforming to 410-SP-2 of IS:2713 (part-II) 1980, extending the top sectio by 1.25m and smoothly curved making an angle of 10 to 15 degree with the horizontal plane, bracket fitted with suitable size of mild steel nipple (minimum 10cm in the bracket) to hold the fitting.

81

Each

V.

Supply and erection of weather proof MS box of size 20cm x 15cm x 10cm covered with 3mm thick MS sheet hinged cover housed in 1:2:4 cement concrete muff including suitable size of PVC pipe for incoming and outgoing cables, including the cost of 1 No. 16A 415V Kit Kat and 2 Nos. 63A 415V neutral links, fixed on hard wood board in the MS box including the cost of locking arrangement, painting and necessary connections etc.

(i)

Muff size 40cm dia 50cm high

81

Each

10.

31.33

Supply and erection of Godrej Almirah type MS pedestal made of 50mmx50mmx6mm angle iron grame with 3mm thick MS sheet covering including shutters with suitable hinges and locking arrangement with Godrej type handle including round bars. The top covering should have downward overhang of 75mm on all sides of pedestal, having two sets of water proof ventilation holes of suitable size on the sides, at top and bottom, each set containing four Nos. holes to discharge the heat produced by the current. The shutters fixed with rubber gasket of superior quality and of of suitable size to make it water proof.

The pedestal duly painted both inside and outside with two coats of approved paint and primary coat and it's legs are embedded upto the entire depth in 1:2:4 cement concerente block, projected 75mm all around the pedestal and 200mm above the ground level including the cost of all labour and material required to compelte the job in all respect upto the entire satisfaction of engineer-in-charge of work:

(iii)

MS pedestal of size 750mm wide, 1200mm high and 300mm deep and bottom totally open, duly embedded in cement concree block of size 900mmx450mmx200mm above ground level duly plastered with 12mm thick 1:4 cement plaster, having a base of size 1050mmx600mmx250mm below ground level.

1

Each

BOQ FOR PROVIDING CAMPUS LIGHTING IN 350 SEATERS BOYS HOSTEL OF NIT KURUKSHETRA Part A : Scheduled items
Sr. No.	Ref. of HSR	Description	Qty	Unit	Rate (in Rs.)	C.P.	Total Rate (Rs.)	Amount (Rs.)
1.	31.12 (c)	Moulded case circuit breakers Supply and erection of moulded case circuit breaker on wall or on existing pedestal including bonding to earth and necessary connection:
	(i)	15A to 60A 415V 10KA 3 Phase (MCCB 60A)	1	Each
	(d)	Sheet Steel Enclosure Supply and erection of sheet steel enclosures distribution boards suitable for MCBs etc. on wall / existing boards / pedestal with rag bolts including bonding to earth:
	(v)	Distribution board 6 way (TPN)	1	Each
2.	31.17	Supply and erection of miniature circuit breaker / isolator 240/415V in the existing distributin board including making necessary connections:
	(ii)	6A to 32A SP (Havell's / Standard)	18	Each
3.	31.19 (iii)	Painting of pole with 2 coats of enamelled paint or other approved paint.
	(a)	upto the height of 7m
	1	Single bracket	81	Each
4.	31.21	Supply and erection of pipe for wiring purposes including bends inspection boxes etc. where masonary and painting as required:
	(xxx)	Supply and erection of PVC pipe of 6kg pressure, laid 1m below ground level complete, including digging refilling of the trench with jointinge etc.
	(c)	PVC pipe 65mm dia	103	mtrs
5.	31.22	Earthing
	(i)	Earthing with GI earth pipe 4.5m long and 40mm dia with masonary enclosures on the top etc. as required.	19	Each
	(ii)	Extra for using salt and charcoal / coke for pipe earth electrode as required.	19	Each
	(xii)	Providing and laying earth connections from earth electrode with 4mm dia GI wire in 15mm dia GI pipe from earth electrode as required.	38	mtrs
6.	31.25	Supply and erection of underground cable 1m below ground level covered with sand and bricks including necessary connections, digging and refilling of trenches.
	(xxvii)	50sqmm 3.5C cable	135	mtrs
	(xl)	16sqmm 4C cable	2350	mtrs
7.	31.26	Supply and erection of underground cable loose in existing pipe or trenches complete with necessary connections:
	(xxvii)	50sqmm 3.5C cable	30	mtrs
	(xl)	16sqmm 4C cable	330	mtrs
8.	31.28	Supply and erection of suitable compression type brass cable glands for underground cable:
	(ii)	10sqmm to 16sqmm cable 2C to 4C	162	Each
	(iii)	25sqmm to 50sqmm cable 2C to 4C	2	Each
9.	31.30 III.	Supply and erection of stepped steel tubular pole (Swaged type) conforming to IS.S, welded with mild steel base plate of size 30cmx30cmx600mm chick including erection of pole in ground surrounded with 30cm dia of 1:3:6 cement concerete and plateform of 10cm thick to the size of base plate at the bottom.
	(i)	7m long single bracket pole duly embedded 1.25m below ground level conforming to 410-SP-2 of IS:2713 (part-II) 1980, extending the top sectio by 1.25m and smoothly curved making an angle of 10 to 15 degree with the horizontal plane, bracket fitted with suitable size of mild steel nipple (minimum 10cm in the bracket) to hold the fitting.	81	Each
	V.	Supply and erection of weather proof MS box of size 20cm x 15cm x 10cm covered with 3mm thick MS sheet hinged cover housed in 1:2:4 cement concrete muff including suitable size of PVC pipe for incoming and outgoing cables, including the cost of 1 No. 16A 415V Kit Kat and 2 Nos. 63A 415V neutral links, fixed on hard wood board in the MS box including the cost of locking arrangement, painting and necessary connections etc.
	(i)	Muff size 40cm dia 50cm high	81	Each
10.	31.33	Supply and erection of Godrej Almirah type MS pedestal made of 50mmx50mmx6mm angle iron grame with 3mm thick MS sheet covering including shutters with suitable hinges and locking arrangement with Godrej type handle including round bars. The top covering should have downward overhang of 75mm on all sides of pedestal, having two sets of water proof ventilation holes of suitable size on the sides, at top and bottom, each set containing four Nos. holes to discharge the heat produced by the current. The shutters fixed with rubber gasket of superior quality and of of suitable size to make it water proof.
		The pedestal duly painted both inside and outside with two coats of approved paint and primary coat and it's legs are embedded upto the entire depth in 1:2:4 cement concerente block, projected 75mm all around the pedestal and 200mm above the ground level including the cost of all labour and material required to compelte the job in all respect upto the entire satisfaction of engineer-in-charge of work:
	(iii)	MS pedestal of size 750mm wide, 1200mm high and 300mm deep and bottom totally open, duly embedded in cement concree block of size 900mmx450mmx200mm above ground level duly plastered with 12mm thick 1:4 cement plaster, having a base of size 1050mmx600mmx250mm below ground level.	1	Each