BOQ OF ELECT. SERVICES FOR CONSTRUCTION OF 350 SEATERS BOYS HOSTEL FOR UNDER GRADUATE STUDENTS AT NIT KURUKSHETRA
(BASED ON HSR-1988 & LATEST SANCTIONED PREMIUM W.E.F. 01-01-2008)
Sr. No.	Ref. of HSR	Description	Quantity	Unit
		SUB PART-V: INTERNAL ELECTRICAL SERVICES (SCHEDULE ITEMS)
1	31.12 (D)	Supply and erection of sheet steel enclosures distribution boards suitable for MCBs etc. on wall/existing board pedestal with rag bolts including bonding to earth:-
		(iv) Distribution board 8 way (SPN)	7	Each
		(v)  Distribution board 4 way (TPN)	3	Each
		(vi)   Distribution board 6 way (TPN)	21	Each
		(vii)  Distribution board 8 way (TPN)	16	Each
2	31.13	Supply and erection of M.S. angle iron frame duly welded for Housing M.S. sheet & main switches etc. on it, fixed on wall by means of suitable size of rag bolts with cement concrete, duly painted with three coats of approved paint including one coat of red oxide
		(iii)   Size 40 mm x 40 mm x 6 mm.	60	Meter
3	31.14	Supply and erection of 3 mm thick mild steel sheet duly welded on existing M.S. angle iron frame for fixing the main switches etc. as required, duly painted with three coats of approved paint including one coat of red oxide	8.2	Sq m
4	31.15	Supply and erection of sheet steel enclosures 2 pole/ 3 pole with earth plug and socket suitable for incorporating single pole/ triple pole MCB on wall/ on existing pedestal complete with necessary connections etc.
		(ii) SPN enclosure for single pole MCB 20 amp	2	Nos.
5	31.16	Supply and erection of blanking sheet in existing distribution board	24	Each
6	31.17	Supply and erection of miniature circuit breaker/ isolator 240/415 V in  the existing distribution  board including making necessary connection:-
		(a) Miniature Circuit Breakers of 9 K.A. breaking capacity
		(ii) 6 amp to 32 amp (SP) Havell’s/ Standard	836	Each
		(iii) 40 amp to 63 amp. (TPN) Havell’s/ Standard	40	Each
		(ii) 6 amp to 32 amp (SPN) Havell’s/ Standard	8	Each
		(iv) 40 Amp to 63 Amp (TP) Havell's/ Standard	4	Each
7	31.18	Supply and erection of Fittings and Accessories
		(vii) Call bell 220/230 volts A.C. bakelite with double coil	3	Each
		(xi)  Bakelite angle/ straight button holder large size	410	Each
		(xxiv) Erection only of 1 x 40 Watts or 2 x 40 Watts, 1220 mm long/1 x 20 watts or 2 x 20 Watts, 610 mm long fluorescent tube fitting directly on wall including necessary connection with 0. 75 sq mm (24/0-20 mm) PVC copper flexible cable for connection the tube with the adjacent light point	979	Each
		(xxvi) Supply and erection of hexagonal M.S. box 1.60 mm thick having each side 8 cms, 7.5 cms deep, top covered with M.S. lid by means of screws including 10 mm dia 30 cm long mild steel rod made into suitable suspension hook and erected in R.C.C. slab of erection of fan, the bottom covered with 3 mm thick bakelite sheet with suitable holes, painting etc. complete with all labour and material required to complete the job.	510	Each
		(xxxii) Making suitable size of wall niche including cement plastering of inside of niche for metal clad switches, branch distribution boards, bus bar chambers and energy meters	2	Cum
8	31.20	Erection and carriage of fans
		(i) Erection of ceiling fan complete with necessary earthing of fan and regulator including carriage from local railway station/Goods transport/P.W.D store to the site of work	510	Each
		(iii) Erection of exhaust fan complete with necessary earthing of fan and regulator including carriage from local railway station /Goods transport /P.W.D store to the site of work	49	Each
		(v) Making suitable hole in the wall up to 450 mm sweep  exhaust fan including finishing the same and fixing of wire mesh duly fixed with Deodar wood frame of section40 x 25 mm thick	49	Each
		(vi) Peg. And fixing required size of deodar wood frame of section 50 mm x 32 mm for fixing exhaust fan up to 450 mm sweep	49	Each
9	31.21	Supply and erection of pipe for wiring purposes including bends inspection boxes etc. where necessary and painting as required:-
		(xxii) Heavy gauge welded conduit pipe 20 mm dia 1.60 mm thickness flushed	3700	Meter
		(xxii) Heavy gauge welded conduit pipe 25 mm dia 1.60 mm thickness flushed	5200	Meter
		(xxiii) Heavy gauge welded conduit pipe 32 mm dia 1.60 mm thickness flushed (for lighting main)	620	Meter
		(xxiv) Heavy gauge welded conduit pipe (for power main) 40 mm dia 2.00 mm thickness flushed	620	Meter
		(xxx) Supply and erection of PVC pipe of 6 Kg. pressure, laid 1 meter below ground level complete, including digging refilling of the trench with jointing etc.
		(a) PVC pipe 120 mm (for main cable in electricity room)	110	Meter
		(b) PVC pipe 80 mm dia	70	Meter
		(c) PVC pipe 65 MM dia	70	Meter
10	31.22	Earthing
		(iii) Earthing with G.I. earth plate 600 mm x 600 mm x 6 mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) complete as required	18	Each
		(v) Extra for charcoal or coke and salt for G.I. plate or copper plate earth electrode	18	Each
		(xi) Pdg. and fixing 25 mm x 5 mm G.I. Strip in 40 mm dia G.I. pipe from earth electrode as required	248	Meter
		(xv) pdg. and fixing 25 mm x 5 mm GI strip on surface or in recess for connections etc. as required with all labour and material	164	Meter
		(xvi) Pdg. and fixing  4.00 mm dia G.I. wire on surface or in recess for loop earthing as required	156	Meter
11	31.24	(ii) Excavation earth pit 180 cm round at top and 90 cm at bottom 4.5 m deep and refilling the same in plains including supply of necessary charcoal/ coke and salt mixture	8	Nos.
		(iv) Supply and erection of 60 cm x 60 cm x 6 mm thick galvanised iron plate including necessary bolts and nuts to GI tape.	8	Nos.
		(v) Providing standard watering tank including down pipe and CI cover with locking arrangements etc.	8	Nos.
		(vi) Supply and erection of 20 mm x 3 mm thick lighting conductor GI tape fixed with suitable GI stapples of same size.	950	Meter
		(viii) Supply and erection of 25 mm dia meter 1.5 meter long lighting GI tube rod tapered into a point at the top with 16 cm x 16 cm x 3 mm thick GI base plat and necessary nuts and bolts with washers. (In numbers)	14	Each
		(ix) Providing and fixing testing joint made from 20 mm x 3 mm thick GI strip 125 mm with 4 Nos. GI bolts and nuts with washers complete.	8	Each
12	31.25	Supply and erection of under ground cable 1 meter below ground level covered with sand and bricks including necessary connections, digging and refilling of trenches:-
		(xxxiii) 240 Sq mm 3.5 core cable (arm)	440	Meter
		(xxvii) 50 Sq mm 3 ½  Core cable   (armoured)	30	Meter
		(xxix) 70 Sq mm 3 ½ Core cable   (armoured)	60	Meter
		(xl)    16 Sq mm 4 Core cable        (armoured)	50	Meter
		(xxv) 120 Sq.mm 3.5 Core cable (arm)	30	Meter
		(xxx) 120 Sq.mm 3.5 Core cable (arm)	60	Meter
13	31.26	Supply and erection of under ground cable loose in existing pipe or trenches complete with necessary connections.
		(xxvii) 50 sq mm 3 ½  Core cable	28	Meter
		(xxviii) 70 Sq mm 3 ½ Core cable	74	Meter
		(xxxiii) 240 Sq mm 3 ½ Core cable	100	Meter
		(xi) 16 Sq mm 4 Core cable	80	Meter
		(xxv) 25 Sqmm 3.5 Core cable	30	Meter
		(xxx) 120 Sq.mm 3.5 Core cable	74	Meter
14	31.28	Supply and erection of suitable compression type brass Cable glands for underground Cable:-
		(ii) 10 Sq mm to 16 Sq mm Cable 2 to 4 Core	6	Each
		(iii) 25 Sq mm to 50 Sq mm Cable  2 to  4  Core	4	Each
		(iv)70 Sq mm to 95 Sq mm  Cable 3 to 3 ½ Core	8	Each
		(v) 120 Sq. mm to 185 Sq.mm cable 3 to 3 ½ Core	8	Each
		(vi) 240 Sqmm cable 3 to 3 ½ Core	6	Each
15	31.30	(xv) Supply and erection of 32 mm dia meter 1.5 long brackets (B-class) making an angle of  10 degree to 15 degree with horizontal plane for mounting street light fitting fixing of GI bracket on wall with 2 Nos. 32 mm x 3 mm thick MS clamps including cost of cutting, wedding of GI pipe complete with cement sand mixture bolts and nuts etc. including necessary connections.	27	Each
		(xvi) Supply and erection of weather proof Ms box of size 20 cm x 15 cm x 10 cm covered with 3.00 mm thick MS sheet hinged cover, locking arrangements, housed in wall including the cost of 1 No. 16 amp 415 V kitkat and 2 Nos. 63 Amp. 415 V neutral links fixed on hard wood board in the MS box including painting and necessary connections.	27	Each
16	31.35	Miscellaneous
		(i) Supply of M.S. pipe (B- Class) for suspension rod of ceiling fan including threading if required.
		(a) 15 mm dia	40	Meter
		(iii) Supply and erection of caution notice plate in three languages	24	Job
		(iv) Supply and erection of shock restoration chart in glass frame	2	Job
		(vii) Supply and erection of 75 mm x 75 mm x 60 mm deep M.S. box for telephone and inter-communication system including 2 pin 5 amp. socket including cost of bakelite sheet	7	Each
		(ix) Supply and erection of aluminum lugs heavy duty including crimping etc. up to the entire satisfaction of the Engineer-in-charge of the work:-
		(d)  16 Sq mm	26	Each
		(f)   25 Sq mm	8	Each
		(g)  50 Sq mm	6	Each
		(h)  70 Sq mm	32	Each
		(m) 240 Sq mm	18	Each
		(j)  120 Sq mm	30	Each
		(f)   35 Sq mm	8	Each
		(x)  Provided ferrule over the wires for distinction complete with all labour and material required to complete the job
		(a)  1.5 Sq mm to 2.5 Sq mm	960	Each
		(b) 4 Sq mm  to 10 Sq mm	1140	Each
		(xi) Supply & erection of cable route marker made of 50 cm long 10 mm dia M.S. Rod welded/revitted at the top with 10 cm dia 5 mm thick G.I. plate inscribed with ‘cable’ word on it, having a cross arm 30 cm  long of the same dia welded at the bottom, in existing trench 45 cm below ground level	60	Each
	(A)	PVC Insulated wiring in recessed conduit.
17	31.36	Wiring in 1.5 sq.mm PVC Insulated copper conductor cable in 1.6 mm thick conduit pipe.
	(I)	Fan Point
	(a)	Short Point	434	Each
	(c)	Long Point	126	Each
	(II)	Light Point
	(a)	Short Point	101	Each
	(b)	Medium Point	886	Each
	(c)	Long Point	779	Each
	(III)	Twin control light point with 2 way 5 amp. single pole switch-
	(c)	Long Point	30	Each
	(VI)	Call bell point including M.S Box of size 180mmx100mmx60mm deep for call bell -
	(C)	Long Point	3	Each
	(VII)	3 pin 5 amp. plug point including earthing the 3rd. pin etc. -
	(a)	Short Point	43	Each
	(b)	Medium Point	2	Each
	(C)	Long Point	20	Each
	(VIII)	3 pin 15 amp. plug point with 4 sqmm PVC insulated copper conductor cable including earting the 3rd pin etc.. pin etc. -
	(a)	Short Point	4	Each
	(b)	Medium Point	8	Each
	(C)	Long Point	389	Each
18	31. 40	Supply and erection of PVC unsheathed copper conductor cable single core 1100 volts grade in pipe of suitable size excluding cost and erection of pipe.
	(i)	Size 1.50 sqmm (3 / 0.81mm).	16500	Mtr
	(ii)	Size 2.50 sqmm (3 / 1.05mm).	450	Mtr
	(iii)	Size 4.0 sqmm (7 / 0.85mm).	15000	Mtr
	(iv)	Size 6.0 sqmm (7 / 1.05mm).	2800	Mtr
	(v)	Size 10 sqmm ( 7 / 1.35mm).	2800	Mtr
Sr. No.	Ref. of HSR	Description	Quantity	Unit	Rates to be Quoted by Contractor (In Rs.) In Figure and In Words
		SUB HEAD-VI : INTERNAL ELECTRICAL SERVICES (NON SCHEDULED ITEMS)
1		Supply, Installation, testing, commissioning handling etc. of power distribution board fabricated with 1.6 mm steel (CRCA) after having sever tank treatment duly powder  coated paint all enclosure must have hinged door/cover, inner side of cover having circuit diagram enclosure, ferrules on all wire, earth grid all bottom with terminals, floor mounted, top & bottom cable entry plate of cubical panel having cable allay & bus bar allay, IP 52 protection, volt meter with  voltage selector switch, Am meter with ampere sector & with, C.T.’s, space for energy meter. The panel single line diagram & general arrangement must be approved before fabrication and having following incoming/outgoings:
		MAIN PCC PANEL
		1. Incomers
		(i) 630A, 4 Pole, 35 KA, MCCB, rotary handle, overload & short circuit release - 01 Nos.
		(ii) 400 A, 4 pole, 35 KA MCCB, rotary  handle overload & short circuit release - 01 Nos.
		(iii) 400 A, 4 Pole, 415V changeover switch -01 Nos.
		(iv) Metering with 2 sets of 3 phase indicator lamp with protection fuse, 2 sets of voltmeter 0-500 V with selector switch, 2 set of Ammeter (0-600 A & 0-400A) with selector switches and CTS= 1 set
		(v) 2 Nos. A1 TPN bus bar with one of 800 Amp. & second of 5000 Amp.
		2. Out goings:
		(i) 160 A 4 pole, 35 KA MCCB-5 Nos.
		(ii) 125 A, 4 Pole, 35 KA, MCCB rotary handle with overload & short circuit release - 5 Nos.
		(iii) 63 A,4 Pole, 25 KA, MCCB, rotary handle with overload & short circuit Release - 04 Nos.
		(Makes of MCCB etc. as per approved list of material)	1	Each
2	NS	Sub panels as above with following incoming/out goings: (PDB 1 to PDB-4)
		1. Incoming
		(i) 160 A, 4 Pole, 35 KA, MCCB, rotary handle with adjustable overload  & Short circuit release - 01 Nos.
		(ii) 1 set of 3 phase indicator lamp with voltmeter 0-500V 2 selector switch & protection fuse= 1 set
		(iii) 200 A AL TPN busbar= 1 No.
		2. Out going
		(i) 63 A, 4 Pole, 25 KA MCCB, rotary handle with adjustable overload  & Short circuit release - 06 Nos.	4	Each
3	NS	Sub panels as above with following incoming/out goings: LDB-1 to LDB-4
		1. Incoming
		(i) 125 A, 4 Pole, 35 KA, MCCB, rotary handle with adjustable overload  & Short circuit release - 01 No.
		(ii) 1 set of 3 phase indicator lamp with voltmeter 0-500V 2 selector switch &  protection fuse= 1 set
		(iii) 150 AAL TPN bus bar= 1 set
		2. Out going
		(i) 63 A, 4 Pole, 25 KA MCCB, rotary handle with adjustable overload  & Short circuit release - 07 Nos.
		(ii) 32 A MCB DP (for campus light)= 1 No.	4	Each
4	NS	Supply of following luminaries comprising of basic channel, holder, Instant start, flicker free electronic operation, Easy to fit snap on adjustable installer, compatible with energy saving tube light as per specification, including connecting wires, clamps screws fixing arrangement etc.
	(a)	T5,28 W Philips TCH 128/2005/865 light fitting including 28 W, t5 tube fixture ( Rooms, Mess, Common rooms etc.	428	Each
	(b)	T5 2x28 W Philips light fitting including 2 Nos. 28 W, t5 tube fixture ( Mess, Common rooms etc.	100	Each
	(b)	TCH 114/2005/865 light fitting i/c T5 14 W tube rod fixture (corridors, bathrooms etc.)	500	Each
	(c)	250 W 1 X SON/SON – T 250 Philips with lamps 250 W for security light. SRP 202/250	27	Each
	(d)	Ceiling light decorative fitting Deco Twist Lux BCS 1902 Philips make along with 25W CFL Lamp compete as required	352	Each
	(e)	2 x 36 watt mirror optical CFL surface mounted square type fitting 2'-2' size complete with copper wound choke and @ 36 watt CFL lamps.  The fitting should be Bajaj make BLWS 236 CFLP-5 or equivalent Philips/ wipro make.	8	Each
5	NS	Supplying ceiling fan 1200 mm sweep, double ball bearing with mechanical regulator including all accessories, wiring, down rod of standard length etc. complete as required.	367	Each
6	NS	Supplying ceiling fan 1400 mm sweep, double ball bearing with mechanical regulator including all accessories, wiring, down rod of standard length etc. complete as required.	143	Each
7	NS	Supplying exhaust fan 300 mm sweep, heavy duty including louvers/ shutters all accessories wiring etc. complete as required.	9	Each
8	NS (a)	Supplying exhaust fan 450 mm sweep, 900 rpm heavy duty including louvers/ shutters all accessories wiring etc. complete as required.	40	Each
	(b)	Supply and laying of telephone wire PVC copper 2 pair 0.5 sq.mm. in existing MS conduit including cost of petty material required to draw the wire and making connections.	200	Meter
	(c )	Supply and erection of 75 mm x 75 mm x 60 mm deep MS box flushed in wall for TV socket including S/E of TV socket and bakelite sheets 3 mm thick and other petty material.	3	Each
	(d)	S/E of wall fan 16" size oscillating type with built in regulator to be fixed on wall with screws etc. and making connections with cost of wire etc.	1	Each
	(e)	S/E of computer outlet with RJ-45 modular type with box, cover plate recessed in wall	5	Each
	(f)	Supply and laying of Cat-6 computer cable in existing conduit pipe including termination	200	Meter
	(g)	Supply and laying of TV co-axial wire RS-11 in existing conduct pipe including making connections	100	Meter
	(h)	Supply and making of masonry chamber of size 450 mm x 450 mm made of 9" thick brick masonry walls dully plastered from inside. The frame of haudi should be 40 x 40 x 5 mm angle iron and cover of 35 x 35 x 5 mm angle with RCC and top surface matching to floor surface. The job includes cost of all above said material including excavation pit for land.	7	Each